The sample probe is installed to extract a representative sample from the exhaust gas of the ship engine. If several engines or combustion processes onboard are to be monitored, one sample probe must be installed per engine.
The heated sample transport line consists of a pre-assembled tube bundle with its own electrical heat tracer cable. An aluminum jacket holds the heat cable and the sample tube together. A high efficient insulation material is wound around the tracer and the sample tube, and a weather protective outer sheet covers the entire tube bundle. The tube bundle is designed for outdoor installations, but end seals must be used to avoid ingress of moisture.
The Sample Conditioning System is enclosed by a specially designed cabinet. This cabinet is made of stainless steel, and is wall -mounted. The complete assembly is designed for mounting to a support welded on the ship casing. The purpose of the Sample Conditioning System is to treat the exhaust gas sample extracted by the sample probe via the heated sample transport line. This sample is wet, but the temperature is kept above dew point.
3. ANALYSER CABINET
The Analyser Cabinet is enclosed by a specially designed cabinet. This cabinet is made of stainless steel, and is wall -mounted. The cabinet is standing on top of two compression cushions to minimise the effects of high gravitational forces when the ship is moving into heavy seas. The cabinet is supported on the rear of the wall frame by soft anti-vibration cushions to reduce the impact of horizontal vibrational movements.
调试工作 commissioning services
.Main Equipment checking and running test which include EGCS Sea Water Pump&wash water analysis unit water pump,sealing air fans etc.
.Piping and fittings inspection which include S.W side, wash water side, exhaust gas system, sealing air system, control air system, etc. For ensure all connection are tightened without shaking and leakage occurred.
.Valves inspection and open/close test which include water valves, exhaust gas damper valves and control air valve, etc. For ensure all valves move smoothly without getting stuck and failure control occurred.
.Parameters checking and inspection which include temperature sensors, pressure transmitters,flow-meters,local gauge,PH sensor,etc.
.Analysis and monitoring units checking and inspection which include water monitoring system and continues emission monitoring system.
.Electrical device and wires connection checking.
.During system commissioning and running period,check the stability of the whole system and make some adjustments and improvements if necessary.
.Training services are provided to ship’s crew or users in English or Chinese.
售后服务 after sale service
技术指导 technical support